Seachem CoralCrete – 57g

Seachem CoralCrete™ is two-part epoxy putty that can be used to secure coral to rockwork or to fuse together rockwork for more stable foundations in reef aquaria. It has a working time of 5 minutes which allows for plenty of work time while also quickly securing coral or rock. CoralCrete™ is ideal for working with larger colonies of branching coral, most large polyp coral or adhering plating coral to rockwork. CoralCrete™ is safe for aquarium inhabitants when used as directed.

Direction:

For sensitive skin, wear latex gloves. Cut off desired amount of CoralCrete™. Replace unused CoralCrete™ into plastic storage tube. Remove film and knead CoralCrete™ together until uniform color is achieved. Once mixed, CoralCrete™ can be used to adhere coral or rock, either submerged or emerged. Press firmly around base or contact point of coral or rock to insure CoralCrete™ penetrates pores and surface grooves. Curing begins in about 5 minutes, hardening in about 15 minutes. CoralCrete™ cures fully in 24 hours. Protein Skimmers may over activate during cure time.

Safety:

Danger. Causes skin irritation. Causes serious eye irritation. Keep container tightly closed. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves//eye protection. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs, or if eye irritation persists, get medical advice/attention.