Jebao Jecod ECP-180M Cross‑Flow Pump Wave Maker

Jebao Jecod ECP-180M Cross‑Flow Pump Wave Maker – Silent, Smart Wave Creation for Large Aquariums

The Jebao ECP‑180M delivers powerful, natural water movement while remaining virtually silent. Its DC motor and sine‑wave technology provide stable, high‑performance flow that mimics ocean currents, enhancing fish health and plant growth. Integrated Wi‑Fi and an intuitive LCD controller let you adjust flow rates from any iOS or Android device, making it the perfect smart addition for modern aquariums.

Designed for tanks between 150 cm and 180 cm, the pump supports glass thickness up to 19 mm and works equally well in marine and freshwater environments. The compact dimensions and lightweight design (3 lb) ensure easy installation without compromising on power.

Specifications – Jebao Jecod ECP-180M Cross‑Flow Pump Wave Maker

• Dimensions: 13.5″ × 3.25″ × 1.5″ (34.3 cm × 8.3 cm × 3.8 cm)
• Power: 100‑240 V AC, 50/60 Hz, DC 24 V, 65 W
• Maximum Flow Rate: 30,000 LPH
• Suitable Tank Size: 150‑180 cm (supports glass up to 19 mm)
• Weight: 3 lb (1.36 kg)
• Package Dimensions: 15 × 7 × 4 inches
• Control: Wi‑Fi (iOS & Android) + manual LCD controller
• Motor Type: Sine‑wave, ultra‑quiet
• Impeller: Single cross‑wave design, no dead‑end flow
• Materials: No exposed copper element, suitable for both marine and freshwater

How to Use This Wave Maker

1. Unbox the pump, controller and power adapter.
2. Place the pump at the desired location in the aquarium, ensuring the inlet is submerged.
3. Connect the power adapter to a standard wall outlet (100‑240 V).
4. Turn on the pump and use the LCD controller to set an initial flow rate.
5. Download the Jebao App, connect via Wi‑Fi, and fine‑tune the flow settings from your smartphone.
6. Monitor the wave pattern and adjust as needed for optimal circulation.

Care & Maintenance Tips

• Turn off and unplug the pump before cleaning.
• Periodically rinse the impeller and housing with fresh water to remove debris.
• Check all electrical connections for corrosion, especially in marine setups.
• Ensure the pump remains level to avoid excessive vibration.
• Inspect the silicone seals regularly and replace if worn.
• Update the Jebao App firmware when prompted for improved performance.