EHEIM pickup 60 Internal Aquarium Filter – 2008

EHEIM pickup 60 Internal Aquarium Filter: Unmatched Convenience for Clear Water

The EHEIM pickup 60 Internal Aquarium Filter revolutionises aquarium maintenance with its intelligent and user-friendly design. Tailored for aquariums up to 60 litres, this compact internal filter features a distinctive “pickup” concept that sets it apart. The entire filter canister, along with its cartridge, can be easily lifted and removed from the top of the unit, while the robust pump component remains submerged within your tank. This innovative approach vastly simplifies the process of cleaning the filter or replacing media, ensuring your aquatic environment stays pristine without unnecessary disruption.

Designed for efficient water purification, the EHEIM pickup 60 draws in water from the bottom, guiding it through the high-quality filter cartridge for thorough mechanical filtration. The purified water is then returned to the aquarium through a cleverly designed rotatable outlet nozzle, allowing you to precisely adjust the direction of the water flow. This not only aids in optimal water circulation but also helps prevent dead spots in your tank. Suitable for both freshwater and seawater setups, this filter is a reliable choice for maintaining a healthy and vibrant aquatic ecosystem, arriving complete with a filter cartridge, ready for immediate operation.

Specifications

• Product Model: EHEIM pickup 60
• Filter Type: Internal Power Filter
• Aquarium Capacity: For aquariums up to approx. 60 litres (from about 30 litres)
• Filter Volume: 0.2 litres
• Power at 50 Hz: 4 Watt
• Pump Power (50 Hz) per hour: 150 – 300 litres
• Pumping Head (H max at 50 Hz): 0.35 metres
• Dimensions (Height x Width x Depth): 163 mm x 75 mm x 96 mm
• Freshwater Compatibility: Yes
• Seawater Compatibility: Yes
• Outdoor Use: No
• Manufacturer Guarantee: 3 Year(s)
• Packing Parts: 4 parts
• Packing Dimensions (Height x Width x Depth): 20.1 cm x 15.4 cm x 7.6 cm
• EAN: 4011708200544
• Product Number: 2008020

How to Use This Internal Aquarium Filter

1. Position the Filter: Submerge the EHEIM pickup 60 filter completely inside your aquarium.
2. Attach Securely: Use the provided suction cups to firmly attach the pump unit to the inside glass wall of your aquarium, ensuring it is fully submerged.
3. Plug In: Connect the power cable to a suitable electrical outlet. The pump will immediately begin to draw water from below and circulate it through the filter cartridge.
4. Adjust Outflow: Rotate the outlet nozzle located at the top of the filter to direct the filtered water flow. Adjust it to create optimal circulation within your tank, avoiding direct impingement on plants or inhabitants.
5. Initial Check: Monitor the filter for the first few hours to ensure proper operation and water flow.

Care & Maintenance Tips

• Regular Cleaning: For consistent performance, regularly remove the filter canister from above (while the pump unit remains in the tank) and rinse the filter cartridge under lukewarm tap water. Avoid hot water as it can damage beneficial bacteria if you intend to reuse the cartridge.
• Cartridge Replacement: Replace the filter cartridge regularly, typically every 2-4 weeks, depending on your aquarium’s bioload and water parameters. Always use genuine EHEIM replacement cartridges for optimal fit and filtration.
• Activated Carbon Use: Utilize activated carbon cartridges (sold separately) during aquarium start-ups or after medication treatment to absorb impurities and residual chemicals. Remember to remove carbon cartridges after 1-2 weeks as they can release absorbed substances back into the water.
• Pump Maintenance: Periodically check the pump impeller and its housing for any debris or blockages that might reduce performance. Clean them gently with a soft brush if necessary.
• Power Off During Maintenance: Always unplug the filter from the power supply before performing any maintenance or cleaning procedures to ensure safety.