Jebao Jecod PC-3 Pond Cleaner – Powerful, Portable Vacuum for Decorative Ponds
The Jebao Jecod PC-3 is a compact, hand‑held sludge vacuum designed for small decorative ponds and koi reservoirs. Its 150 W electric pump delivers up to 8,000 LPH (≈9,000 L/h) and can lift water from depths of 1.8 m, efficiently removing bottom sediments, debris, and organic matter. Two interchangeable attachments – a brush‑wheel combo for flat surfaces and a silt‑collector for tight spots – ensure thorough cleaning. The 5 m reinforced hose (40 mm diameter) and telescopic handle (adjustable 1‑2 m) provide ergonomic reach, while safety features automatically shut the pump down if the rotor is blocked or air enters the impeller.
Specifications
- Motor Power: 150 W
- Flow Rate: 8,000 LPH (≈9,000 L/h)
- Maximum Working Depth: 1.8 m
- Maximum Debris Size: 25 mm
- Hose Length: 5 m (diameter 40 mm)
- Handle Extension: 1‑2 m telescopic
- Power Cable Length: 10 m
- Automatic Shutdown: Rotor blockage & air‑impeller detection
How to Use This Pond Cleaner
- Assemble the unit by attaching the desired head (brush‑wheel or silt collector) to the hose.
- Connect the hose to the suction inlet and ensure the power cable is safely routed.
- Place the intake nozzle in the pond water, adjust the telescopic handle for comfortable reach, and switch the pump on.
- Move the nozzle slowly across the pond floor, allowing the pump to lift sediments and debris into the hose.
- When cleaning is complete, turn off the pump, detach the hose, and empty the collected water into a garden or suitable drainage.
Care & Maintenance Tips
- Rinse the hose and attachments with clean water after each use to prevent clogging.
- Inspect the impeller and rotor regularly; clear any large debris to maintain performance.
- Store the cleaner in a dry, shaded area to protect the electric components.
- Check the power cable for wear before each session and replace if damaged.
- Periodically verify the automatic shutdown functions by running the pump briefly with a small obstruction.
