JEBAO CP-25 Cross Flow Wave Maker With Controller

• Tank Size 26-105Gallon, Glass Thickness up to .5″
• Flow up to 2377g/h (Cross Flow for Whole Tank)
• Power 100V to 240V 50/60hzDC1.7A 25W
• Super Extreme Magnet Include
• Size 11.2″ x 2.2″ x 1.5″

JECOD Aquarium Wave Maker CP-25 With controller

Assembly Notice:

1. Suitable for most sizes of the fish tank, the tank thickness of less than 15 mm would be better.
2. Access: controlelr, adapter, power cable, cross flow pump, user’s manual.
3. pump assembly

• The cross flow pump has a built-in safety mechanism. you must first connect the cable from the controller to the pump then connect the cable from power supply to the controller.
• please use the magnet mount set to locate the cross flow wave pump where you intend to install. Install the wet side magnet firstly, then move the dry side magnet to fix the pump. Do not place your fingers between the magnet mount set as there is a strong mechanism. please reference the install instruction photos as below.
• clean the glass before assembly the pump.
• magnet holder clamp upto a glass of thickness of 15mm or need to buy extra magnet holder set if glass thicker than 15mm.
• Rotate the Flow cages clockwise to adjust the angle of water flow.
• Attention.